Single Phase DIN Rail Power Supply 24 V DC / 10 A - Eco Series

POWER 1AC 24-10 ECO

Basic function DIN rail Power Supply with ultra slim dimensions

Function

Primary-switched/regulated power supply, Input: 1-phase 100 ... 240 V AC (± 10 %) / 140 ... 340 V DC (± 10 %), Output: 24 V DC / 10 A, 240 W, Power Boost: 150 % for 5 sec.

Features

Built-in Inrush Current Limiting
Adjustable Output Voltage with Potentiometer
Power Boost 150%
Parallel Operation
Ultra Slim Dimensions

HAVE A QUESTION?

Datasheet- POWER 1AC 24-10 ECO Download

SKU/Order No.: SA-PE1A-24-10-00

Additional Information

POWER 1AC 24-10 ECO is a switched-mode power supply from the SALZ Automation ECO series are ideally suited for most applications in industry as well as in commercial and residential buildings. The product can be used for simple machines and applications where extreme compactness is required. POWER 1AC 24-10 ECO stands out with its compact design. This single-phase power supply with a rated power of 240W has an input voltage of 100 ... 240 V AC (±10%)/ 140 ... 340V DC (±10%) and an output voltage of 24V DC/10A. The input is located at the bottom of the device and the outputs at the top. The output of the power supply can e regulated using the potentiometer situated at the front of the product. The product has a power boost of 150% for the first 5 seconds as well as integrated overload, short circuit, overvoltage, and undervoltage protection. The metal housing is mounted by snapping onto a DIN rail. Access to additional documentation is made easy via a QR code on the device. Due to the multitude of existing product standards and certifications, it is suitable for international use.

Input Data

Output Data

Protection Circuit

Isolation

Ambient Condition

Mechanical Data

Lifetime

Dimensions

Commercial Data

Standards and Regulations

Characteristics

Input Data back to top

Input Voltage Range AC	100 ... 240V AC (±10%)
Input Current (typ.)	1.3 A (230 V AC), 2.25 A (115 V AC)
Frequency	47 ... 63 Hz
Efficiency (typ.)	88 %
Power Factor (cos φ)	PF>0.98 (115VAC), PF>0.95 (230VAC)
Inrush Current (typ.)	35 A (230 V AC), 20 A (115 V AC)
Input Voltage Range DC	140 ... 340V DC (±10%)

Output Data back to top

Output Voltage	24 V DC
Output Voltage Range	21.6 ... 27.6 V DC
Output Current	10 A
Line Regulation	±0.5%
Load Regulation	±1%
Ripple (typ.)	150mVp-p
Ripple Noise (typ.)	150mVp-p
Power Output	240W
Power Boost	150% for 5 Sec.

Protection Circuit back to top

Overcurrent Protection	Works over 105 ... 160% of rated current and recovers automatically
Overvoltage protection	29 ... 33 V
DC OK Signalling	LED (Green)
Over Temperature Protection	Shut Down, Auto Recovery

Isolation back to top

Input/Output Isolation (at room temperature)	AC 3,000 V 1 minute, Cutoff current = 10 mA, DC 500 V 50 MΩ min
Input/PE Isolation (at room temperature)	AC 2,000 V 1 minute, Cutoff current = 10 mA, DC 500 V 50 MΩ min
Output/PE Isolation (at room temperature)	AC 500 V 1 minute, Cutoff current = 100 mA, DC 500 V 50 MΩ min
Output/RC, DC OK Isolation (at room temperature)	AC 500 V 1 minute, Cutoff current = 100 mA, DC 500 V 50 MΩ min

Ambient Condition back to top

Ambient Temperature (operating)	Operating -20°C ... 70°C, > 50°C de-rating, 50% at 70°C
Ambient Temperature (start-up type tested)	-40 °C
Ambient Temperature (storage/transport)	-40°C ... +85°C
Operating Humidity (non-condensing)	20 ... 95 % RH
Storage Humidity (non-condensing)	10 ... 95 % RH
Vibration	10 ... 55 Hz, 19.6 m/s² (2G), 3 minutes period, 60 minutes along Z axis (Non operating, mounted on DIN Rail)
Impact / Shock	147m/s2, 11ms, test in operating mode. Testing ntmber of shock: 3 shocks per direction, ±x,y,z in totally it is 18 shocks.(IEC 60068-2-27)
Degree of Protection	IP20
Operating Altitude (max. above sea level)	up to 5000 meters, (derating form 2000 to 5000 meters)，3.5℃/per kilometer without fan

Mechanical Data back to top

Tightening Moment (min. / max.)	max. 1 Nm
Housing	Metal
Mounting DIN Rail according EN 60715	TH35
Weight (typ.)	400 g
Cooling Method	Convection

Lifetime back to top

MTBF (Telcordia) at 25°C	1,645,200 h (100 % Load)
MTBF (MIL-HTBK-217F) at 25°C	230,200 h (100 % Load)

Dimensions back to top

Width (mm)	63 mm
Depth (mm)	113.5 mm
Height (mm)	125.2 mm

Commercial Data back to top

Customs Tariff Number	85044095
GTIN	4262552160366

Standards and Regulations back to top

Degree of Pollution

Characteristics back to top

Earth Leakage Current	<1 mA / 240 V AC
Max. Rise Time	100 ms (230 V AC), 100 ms (115 V AC)
Start-up with Capacitive loads	2200 μf (75/120 W), 5000 μf (240/480 W) , 8000 uF (960 W)

Built-in Inrush Current Limiting

Thermistor, thyristor technique or active power relay circuit is used in the inrush current limiting circuit.

Adjustable Output Voltage with Potentiometer

To increase an output voltage, turn a built-in potentiometer clockwise. To decrease the output voltage, turn it counterclockwise.

Power Boost 150%

A power boost of 150% for 5 seconds means that the power supply can temporarily deliver 150% of its rated output power for a short duration, specifically for 5 seconds. This feature is useful in applications where the connected load occasionally requires more power than the normal operating conditions.